28
• Push START/STOP the Hour will flash, advance the Hour with LAP/RESET
till correct in AM or PM.
• Push START/STOP the Minutes will flash, advance the Minutes with
LAP/RESET till correct.
When all new settings are done, you must push the MODE button to save.
SETTING DUAL TIME HIGH TIDE :
Note 1 : Setting DUAL TIME (DT) HIGH TIDE information is done inside the FT2
mode. You must only use HIGH TIDE information from your DT area. The HIGH
TIDE information can be from today or any other day, as long as the correct
Year, Month, Date and Time is programmed for that HIGH TIDE. You can use any
DT tide tables from a surf shop or DT daily newspaper to find HIGH TIDE times.
(Remember you must complete each section of the programming within 30
seconds or the watch will return to FT MODE and you will need to start again.
So get your DT HIGH TIDE information prior to starting.)
Note 2 : During Daylight Saving you must always set DT mode and DT HIGH
TIDE information to Standard Time, (not in Daylight Saving Time), and DO NOT
add one hour to your DT Tide chart time. When setting is complete, push and
hold for 5 seconds the START/STOP button in DT mode to advance for DST. At
the end of DST push and hold the START/STOP button for 5 seconds again to
return to Standard Time.
• From NT mode push the MODE button six times.
• FT2 is displayed in the seventh box from the left, Month,
Date, Hour and Year are displayed.
• Hold down MODE for 3 seconds till “SET” appears in
the top right corner. The Year will also flash.
• Advance the Year of your chosen HIGH TIDE with
LAP/RESET till correct. (For quick advance hold in the
LAP/RESET button)
• Push START/STOP the Month will flash, advance the Month of your chosen
HIGH TIDE with LAP/RESET till correct.
• Push START/STOP the Date will flash, advance the Date of your chosen
