ATS - TIDE WALL CLOCK
OPERATION MANUAL
1.Place one “AA” size alkaline battery into the battery compartment to
activate your clock.(Not included)
2.To set the tide time, check the local time of hightide. Rotate the time adjust-
ment knob on the right side of the back of the movement until the hands show
the time of high tide. Rotate the tide hand adjustment knob on the left side
of the back of the movement until the tide hand is at the high tide position.
3. To set the time, rotate the time adjustment knob until the hands show the
actual time.The tide hand will move automatically as the time is adjusted.
4. When the clock starts losing time, the battery has to be replaced
with a fresh “AA” 1.5 volt battery to avoid damage to the clock due to
battery leakage.
31
