41
BIOS
Setup
2 -
BIOS Setup
Suspend
Time Out
(Minute)
When only the selection ”Power Management /APM” is
set to “Enabled”, this option will be available.
This option specifies the length of a period of system
inactivity while in Standby State. When this length of
time expires, the computer enters Suspend Power
State.
The choices: Off
(
Default
), 1 min, 2 min, 4 min, 8 min,
10 min, 20 min, 30 min, 40 min, 50 min,60 min
IRQ
1/3/4/5/6/7/9/
10/11/12/14/15
This option allows a user to set if let BIOS detect the
IRQ events. When the BIOS detects an IRQ trigger
event being activated, the system will wake up and
resumes its activities.
The choices: Ignore(
Default
), Monitor
USB
Controller
Resume
When in the Advanced Power Management (APM)
mode, this option allows a user to wake up the system
from a USB device.
The choices:
Enabled), Disabled (
Default
)
PME Resume
When in the Advanced Power Management (APM)
mode, this option allows a user to wake up the system
from a PME device.
The choices:
Enabled), Disabled
(Default
)
R1 Resume
When in the Advanced Power Management (APM)
mode, this option allows a user to wake up the system
from a R1 device.
The choices:
Enabled), Disabled
(Default
)