14
1 -
Hardware Installation
Hardware
Installation
O
N
Pin 1
FDC
SDRCB Floppy Drive Connectors
Slim
FDC
Pin 1
3. Primary Ultra DMA 33 IDE connectors
(One 40-pin IDE)
The connector support the provided 40-wire IDE hard disk ribbon cable.
After connecting the single end to the board, connect the two plugs at the
other end to your hard disk(s). If you install two hard disks in the same
cable, you must configure the second drive to Slave mode by setting its
jumper accordingly. Please refer to the documentation of your hard disk
for the jumper settings. BIOS now supports IDE HDD or IDE CD-ROM
bootup (Pin 20 is removed to prevent inserting in the wrong orientation
when using ribbon cables with pin 20 plugged).
Pin 1
IDE Connector
SDRCB IDE Connectors
O
N