12
2 -
BIOS Setup
BIOS
Setup
Serial Port
Address
This option specifies the base I/O port address of
serial port 1.
The choices:
Disabled, 3F8
(Default
), 2E8,3E8,2E8
Serial Port 1
IRQ
This option specifies the IRQ# of the serial port 1.
The choices:
Disabled, 3, 4
(Default
)
Serial Port 2
Address
This option specifies the base I/O port address of
serial port 2.
Note: If one port address is assigned to serial port 1,
that address will be not able to resign to serial port 2.
The choices:
Disabled, 3E8
(Default
), 2E8,2E8, 3F8
Serial Port 2
IRQ
This option specifies the IRQ# of the serial port 2.
The choices:
Disabled, 4, 3
(Default
)
Serial Port 2
Mode
This option specifies the operating mode for serial port
2. Set this option to Normal when the system doesn’t
use IR.
The choices:
Normal
(Default
), Sharp-IR, SIR,
Consumer
IR Duplex
Mode
This option specifies the infrared transmission
method. The settings are Full or Half. This option only
appear if the “Serial Port2 “ is not set to “”Disabled”
The choices:
Half Duplex
(Default
), Full
Mode
Description
Full Duplex
Data is transmitted in two
directions at once. Any data you
send will not appear on your
screen until it has been received
by the other device and sent
back to you. Full duplex is the
faster of the two modes