36
2 -
BIOS Setup
BIOS
Setup
Reset Config
Data
No: does not force the PnP data to be cleared during
boot up the system.
Yes: Clear PCI/PnP configuration data stored in flash
on next system boot up
The choices:
No (
Default),
Yes
PCI Latency
Timer
This option specifies the latency timings (in PCI
clocks ) for PCI devices installed
Leave on default setting for the best compatibility.
The choices:
32
(Default
)/64/96/128/160/192/224/248
Allocate IRQ
to PCI VGA
Set this option to “Yes” to allocate an IRQ to the VGA
device in the PCI bus.
The choices:
Yes (
Default),
No
Palette
Snooping
When this option is set to “Enabled”, multiple VGA
devices operating on different buses can handle data
from the CPU on each set of palette registers on
every video device.
Disabled-Data read and written by the CPU is only
directed to PCI VGA device’s palette registers.
Enabled- Data read and written by the CPU is directed
to the both the PCI VGA device’s palette registers and
ISA VGA device palette registers, permitting the
palette registers of both devices to be identical.
The choices:
Enabled, Disabled
( Default)
PCI IDE Bus
Master
Set this option to “ Enabled” to specify that the IDE
controller on the PCI bus has bus mastering
capability.
The choices:
Enabled, Disabled
( Default)