8
Tip Skis
Gather the two parts for each tip ski and send the
edges smooth. Using medium CA, glue the ski
bottom to the upright. Note that the wide part of
the ski faces forward.
Spray the ski lightly with foam safe accelerator
and use glue on the upright for an instant bond.
Be sure that the ski bottom is centered on the
upright.
Glue the rear portion, allow a few seconds to
cure then glue the forward section, bending the
ski bottom to conform.
Repeat for the other tip ski.
Fuselage
This is the most important part of the build. Take
your time and build square and straight.
The fuse is made of two outer sides and an inner
core of EPP foam.
We recommend using poly glue for all fuse
construction as it allows you a few minutes to
correctly position everything prior to curing.
Gather the two fuse sides and the three EPP
parts.
Summary of Contents for Sea Monkey
Page 4: ...4 5mm ESP foam parts ...
Page 5: ...5 ...
