12
Wing
The wing needs to be curved before we
assemble it.
Use any round object at least 18 inches long and
1-1/2 to 3 inches in diameter.
The wing has three parts; the center section and
two tips.
The wing tips have a rounded corner on the
forward leading edge.
Lay them out so that you have a right and left.
Use your round pipe (or whatever) as a mandrel
to wrap the wing around.
We like to put the pipe on the wing, and pull up
the leading edge to wrap around the pipe.
Keep your hands moving and curl the wing until it
touches itself.
Be sure that you keep the pipe parallel with the
leading edge and take your time.
You should end up with a wing that can be
flattened into a pretty nice airfoil.
Do the same for the tips, making sure you have a
right and a left.
Summary of Contents for Sea Monkey
Page 4: ...4 5mm ESP foam parts ...
Page 5: ...5 ...
