10
Glue the 1/16 ply motor plate in place with poly
glue. Tape in place until cured.
Tail
Using Hinge tape, attach the elevator to the
stabilizer. Be sure that the tips are aligned.
The elevator control horn slot should be facing
up, and the bevel in the stabilizer should be down
when you tape the elevator in place.
Trim the tape near the joiner, but don’t cut into it.
Cut the tape where it covers the slot for the
control horn.
Use poly to glue the 1/16 ply elevator control
horn in place.
Note that the ply control horns for the elevator
and rudder are different. The rudder horn has a
“V” in the front.
Summary of Contents for Sea Monkey
Page 4: ...4 5mm ESP foam parts ...
Page 5: ...5 ...
