Rion VM-55, Instruction Manual, Page: 165 / 204

153
Serial Interface
Level Range Z
Zch level range upper limit
Setting of X channel level range
Setting command Level Range Z, p1
Parameter p1= 70 to 120 (dB : 10 step)
Request command Level Range Z?
Response data d1
Returned value Same as for setting command
Display Channel Setting
Display channel setting
Setting of display channel
Setting command Display Channel Setting, p1
Parameter p1= “X” (Xch)
p1= “Y” (Ych)
p1= “Z” (Zch)
P1= “XYZ” (Three axis)
Request command Display Channel Setting?
Response data d1
Returned value Same as for setting command
Display Lva Setting
Display
L
v
/
L
va
setting
Setting of display characteristic type
Setting command Display Lva Setting, p1
Parameter p1= “Lv” (Vibration level)
p1= “Lva” (Vibration acceleration level)
Request command Display Lva Setting?
Response data d1
Returned value Same as for setting command