Rion VM-55, Instruction Manual, Page: 131 / 204

119
Optional Accessories
EC-02S – EC-54S conversion cord EC-54ST
EC-54ST is the conversion cord to connect the EC-02S (3 m) or EC-02SB
(10 m) used by conventional vibration level meter to EC-54S (3 m: supplied)
or EC-54SB (10 m).
Printer DPU-414 / BL2-58
Allows printout of measurement screen hard copy and of data stored in the
internal memory or on the SD card (printer, printer paper, connection cable
required).
The procedure for printing data measured with the VM-55 is as follows.
Turn power to the VM-55 and the printer on and set the printer to the online
state. It is assumed that the steps described in “Preparations” (starting on
page 11) have been completed.
For information on how to connect the DPU-414, how to set the baud rate,
and how to set the DIP switches of the DPU-414, refer to pages 25–27. For
information on how to connect the BL2-58 and how to set the baud rate etc.,
refer to pages 25, 26, and 28.
For details about printer operation, refer to the documentation supplied with
the printer.
EC-54S (3 m: supplied) or
EC-54SB (10 m)
EC-54ST (0.3 m)
EC-02S (3 m) or
EC-02SB (10 m) PV-83C