Rion VM-55, Instruction Manual, Page: 108 / 204

96
Store Operation
12. Set the timer auto interval. The “timer auto interval” is the time
between measurements.
12-1. Use the keys to select [Timer Auto Interval] and press the
MENU/ENTER key. The timer auto interval screen appears.
12-2. Use the keys to select the timer auto interval (OFF, 5min,
10min, 15min, 30min, 1h, 8h, 24h) and press the MENU/ENTER
key.
When timer auto interval is set
Measurement time (actual measurement time)
set as
L
eq
calculation interval
Measurement
start
Data saved
in address 1
Measurement
in progress
Standby
(sleep mode)
Measurement time (actual measurement time)
set as
L
eq
calculation interval
Data saved
in address 1
Measurement
in progress
Standby
(sleep mode)
Measurement cycle set as
timer auto interval (observation time) Measurement cycle set as
timer auto interval (observation time)
Note
When setting measurement parameters, the measure-
ment time (actual measurement time) set with the
L
eq
calculation interval parameter may not exceed
the measurement cycle (observation time) set with
the timer auto interval parameter. Otherwise an error
message will appear at the start of the measurement.
If the measurement start time and end time are set to
the same setting, measurement will not be performed.
13. Set the sleep mode (see page 61).
13-1. Use the keys to select [Sleep Mode] and press the MENU/
ENTER key. The ON/OFF setting screen appears.
13-2. When you use the sleep mode, select [ON] and press the MENU/
ENTER key.