– 21 –
FITTING UNIT
Fit the Pipe stopper over the connection
between the flue elbow and the manifold.
Engage the hook and rotate it until it snaps
against the body of the clamp.
Connect the flue elbow to the manifold by
moving the appliance into position.
Attach the Air Inlet Hose to the flue manifold on
either inlet position a or b.
The unused inlet is plugged with the rubber cap
supplied on the manifold.
The following components can be fitted by
reaching down the rear of the appliance as it is
positioned against the wall.
Slide the insulation sleeve up to the flue
manifold and slip the securing clip over the
sleeve as shown.
Elbow
Pipe stopper
Flue
Manifold
Fit Clip
Slide
Sock
Flue Manifold
a
b
Pipe stopper
Elbow
Manifold
Hook
Pipe stopper
Summary of Contents for RHFE-263FA 2
