Rinnai I Series, Installation And Operation Manual

Page: 122 / 136

122 Rinnai I - Series Condensing Boiler Combi Manual
1. Locate the PC Board (lower left side of unit) (Figure 3).
2. Locate the red button on the PC Board (Figure 3).
3. Press and hold the red button for five seconds (Figure 3).
4. Press the Mode button on the controller.
5. Scroll to parameter
AO
and press the
Select button.
6. Press the (Up) or (Down) arrows to select
the appropriate gas type.
•
Select
A
for Natural Gas (NG)
•
Select for Propane (LP)
Then, press the Select button.
7. Parameter settings are complete. To enter normal operation mode, press the Mode button.
Figure 3
PC Board
Press and Hold
Red Button
for Five Seconds
NATURAL GAS PROPANE
01-a
A0-a
a0-
A0-a