Ember Installation Guide: 12890-B 02-18
|
21
20
|
Ember Installation Guide: 12890-B 02-18
Burn media installation
Experience has shown that the majority of performance problems
are caused by burn media being installed incorrectly. Please take
the time to read and follow these instructions as malfunctioning
due to incorrect burn media placement is not covered by
warranty.
The Ember MUST NEVER be used with other burn media or burn
media that is damaged.
Ember 600/700 burn media sets - they are different and can’t be interchanged
The Ember 600 and 700 burn media sets are different. The Ember 600 stone set has six less
stones and the log set is narrower and shorter—ensure you have the correct kit before starting.
Ember 600 stone set - laid out in
the correct order
Adding the glass and vermiculite
This step is common to both models and both types of burn media. It requires
removing the upper burn media tray to access the mesh holding tray.
1.
Unscrew the left and right tray screws to lift off the upper mesh holding tray.
2.
Carefully empty the bags of vermiculite and glass into the mesh tray,
blend
together
and
level out.
3.
Put the upper tray back in place and re-tighten the screws.
Positioning guide picture fixed to the unit will help
There should be a wonderful closeup picture secured to the fire to help you decipher what goes
where. Use this in conjunction with these instructions to help with the installation.
Ember 600 log set
Ember 700 log set
Back log
Front log
Lef
t lo
g
Middle lo
g
Right lo
g
Front log
Back log
Lef
t lo
g
Right lo
g
Middle lo
g
Ember 700 stone set - laid out in the correct
order
1
2
2
