For use with the GT-2B01/2013 Welding helmet
Important:
This manual must be read and fully understood before using the Air unit.
The manual must be retained for future reference.
Compulsory Information for the use of a powered respirator with
hood type head unit
Please read these instructions carefully before unpacking your CR-2B01/2013 product.
Failure to comply with the instructions in this leaflet may void your warranty and
adversely affect your health. If you have any questions regarding the suitability of this
product to your task. please contact an occupational hygienist or call the manufacturers
technical help line.
Address and Telephone number information is printed at the back of this leaflet.
Contents:
1. Introduction
2. Approvals
3. Preconditions for use
4. System Overview
5. Unpacking / Assembly / Usage
6. Before Use
7. Maintenance / Cleaning
8. Fault finding
9. Storage and transportation
10. List of Parts and Assembly Drawing
11. Technical data
12. Warranty
1. Introduction:
The CR-2B01/2013 is a respiratory protective system which is based on the principle of
circulated over pressured air in the hood. The belt-mounted blower unit delivers air through a
filter and via an air hose into a headpiece (a hood or mask). The supply of filtered air creates
positive pressure inside of the headpiece, which prevents the external contaminated air from
entering the user's breathing zone.
2. Approvals:
The CR-2B01/2013 PAPR has been designed and manufactured to comply with EN12941:
1998 as a TH2P R SL device.
BS4275 (Guide to implementing an effective respiratory protective device program), which the