5.2.4. Fitting a new Filter:
Inserting a new filter: Put the filter back into position using the same rotating motion and gently
push until it fits well on the body of the unit.
Re fitting the Cover; follow the alignment as per the pictures. Ensure the filter clips enter the
Blower body, then rotate Clockwise until closed. Do not attempt to use the blower unit without
the cover fitted correctly.
5.2.5. Changing the Pre Filter
The pre filter is a sleeve which is fitted over the main filter. To remove / replace simply pull off
the old filter and stretch the new one into position. It's important to ensure that the filter media of
the main filter is completely covered by the pre filter
5.2.6. Attaching the Hose to the Blower Unit:
Align the pins of the Hose Bayonet connector with the slots in the air outlet of the blower. Push
the Bayonet connector into the blower until it reaches the bottom of the hole and then twist in a
clockwise direction until the locating pins clips into place.
Fitting the hose to the hoods is the same procedure.
