|7
EN
6
Mounting the lower base
Remove the four fastening bolts and lift the flue collector off the
base.
Both retaining sheets have only been required for transport
purposes.
Remove both transport securing screws and lift the complete base
unit off the pallet.
The installation variant
C
(RIGHT SIDE flue connection) is pre-
mounted:
For installation variant
A
(LEFT SIDE flue connection) or
B
REAR SIDE
flue connection), you need to interchange the flue pipe attachment
and the blind cover.
Be sure of leak tightness!
Remove the front cover.
Put the base module in place inside the warm-air tiled stove. The
front edge of the bottom plate must be flush with the front of the
tiled stove.
Adjust the base module horizontally by means of the adjusting
screws.
Secure the base module using the dowels, washers and screws
included in the shipment.
#8
#10
#8
#5
#19
