10
Securing the stove module
Remove the lower convection grill using the opener included in the
shipment.
Switch the mechanical lock of the pull-out guide into (horizontal)
operating position again.
Note
If the mechanical lock is not in (horizontal) operating position, an
error message “stove not in position” will be displayed once power
supply has been established again.
Wall mounted installation of control panel
Connect the control panel cable to the touch display and fasten the
wall mounting cover on the wall bracket using the magnets included
in the shipment.
Flush mounted installation of control
panel
Attach the bracket on the flush mounting frame, connect the control
display cable to the touch display and fasten the flush mounting
cover on the bracket using the magnets included in the shipment.
Activate the ON/OFF (I/O) switch and put the appliance into
operation.
#5
#2
#8
#2
