background image

|3

EN

2

Safety clearances

Note

In the inside space the pellet stove insert must be surrounded by 

incombustible

 materials.

The following safety clearances must be observed in the inside space:
b-e > 50mm, c-e > 50mm

The following safety clearances must be observed from the front:
a > 400mm (to non-combustible objects) 
a > 800mm (to combustible objects)

Note

When being installed in a recess, the overhang may be a maximum of 20cm.

Note

The sections for circulating air and supply air, as prescribed in the “Fachregeln des Ofen- und Luftheizungsbauerhandwerks TR-OL 2006” 
(rules of the tiled stove and air heating system builder trade) must be observed. A supply air section of 200cm2, and a circulating air section 
of 200cm2 have already been provided in the appliance.

Installation variants 

(minimum dimensions of inside space)

A

Left side flue connection

B

Rear side flue connection

C

Right side flue connection

>50cm

52,5cm

>30cm

>43cm

52,5cm

>50cm

52,5cm

>50cm

>43cm

 >30cm

>30cm

>30cm

31cm

31cm

Kamin

Anschluss

Kamin

Anschluss

Kamin

Anschluss

43cm

>64cm

>84cm

72cm

>64cm

43cm

Note

For any type of flue connection, the total height of the inner space must be a minimum of 140cm (Revivo 140), or 125cm (Revivo 125).

Summary of Contents for E15883













Reviews: