RIKA CONNECT PELLET F22, Operating Manual

Page: 24 / 36

24
9. COMFORT OPTIONS
Room sensor, Radio room sensor
This option permits control of your stove via room temperature� You
can set both the room temperature and the heating times required�
A room temperature selected by you is observed during the heating
times�
Please see the operating instructions for the option room sensor and
wireless room sensor for more detailed information�
Interface for various options
for various options
The ROOM SENSOR and the WIRELESS ROOM SENSOR are to be
connected to the interface (stove rear) using the connection cable
supplied�
(condition as delivered)
External room thermostat
Your stove has an interface on the rear wall to which you can
connect a customary room thermostat� This requires a 2-pole cable
of 0�5 – 0�75 mm2 cross-section that you have to connect instead of
the cable bridge fitted for delivery�
External connection cable bridge
If the control of your stove is to be assumed by an external room
thermostat, you have to connect your external room thermostat (1)
instead of the standard integrated cable bridge (2)�
The connected room thermostat can be operated in either MANUAL
or AUTOMATIC MODE� In both MODES, the current set heat output
is used, in AUTOMATIC MODE the heating times set at the stove can
also be activated�
You can see whether the external demand is currently activated in
the INFO main menu in submenu item Info - inputs�
If your stove receives an external demand to stop operation, it takes
approx� 5 minutes until it switches off� All further settings required to
your thermostat can be taken from the respective room thermostat
operating instructions�
Note
Operation is not possible unless either a cable bridge or an external
room thermostat is connected� The external demand has priority
over all operating modes (MANUAL/AUTOMATIC/COMFORT)�
Option firenet
Only for combination and pellet stoves with touch panel version
V2�16 or higher�
The firenet module connects your stove to the Internet� You can
operate the stove with any Internet-enabled device (tablet, PC,
Smartphone ���)� So you retrieve the operational status, various
information and make your settings remotely�
For further information, please contact your dealer�
RIKA VOICE
for combi and pellet stoves with touch display, version V2�26 or
above, only and in combination with the RIKA Firenet module and
Amazon Alexa
RIKA VOICE allows you to control your RIKA stove by simply speaking
to it� Power on or off, switching between modes or adjusting the
preferred heat output or room temperature: a few words is all it takes!
More detailed information could be obtained at www.rika.at or from
your dealer�