Examples
None.
4.11.5.8
:SYSTem:COMMunicate:LAN:MANualip[:STATe]
Syntax
:SYSTem:COMMunicate:LAN:MANualip[:STATe]
<
bool>
:SYSTem:COMMunicate:LAN:MANualip[:STATe]?
Description
Sets or queries the on/off state of Manual IP.
Parameter
Name
Type
Range
Default
<bool>
Bool
{0|1|ON|OFF}
0
Remarks
•
In Manual IP mode, you can define the network parameters (such as the IP
address).
•
When all the three configuration modes are set to "ON", the priority of
parameter configuration is "DHCP", "Auto IP", and "Manual IP". Therefore, to
use the Manual IP configuration mode, “DHCP
(
:SYSTem:COMMunicate:LAN:DHCP[:STATe]
)” and “Auto IP
(
:SYSTem:COMMunicate:LAN:AUTOip[:STATe]
)” should be set to “OFF”.
•
The three IP configuration modes cannot be set to "OFF" at the same time.
•
After sending the command, execute
apply the network parameters currently set.
Return Format
The query returns 1 or 0.
Examples
:SYST:COMM:LAN:MAN ON /*Enables the Manual IP mode.*/
:SYST:COMM:LAN:MAN? /*Queries the on/off state of Manual IP. The
query returns 1.*/
Command System
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
85
Summary of Contents for DP2000 Series
Page 1: ......
Page 137: ...d Exit Programming Examples Copyright RIGOL TECHNOLOGIES CO LTD All rights reserved 129...
Page 145: ......
