manualshive.com logo in svg

Rigol DP2000 Series, Programming Manual

Share
Download
Rigol DP2000 Series Programming Manual Download Page 9

1

Document Overview

This manual is your guide to control DP2000 series power supply by sending SCPI
commands via remote interface. DP2000 series can communicate with the PC via the
USB, LAN, or RS232/GPIB interface.

TIP

For the latest version of this manual, download it from the official website of RIGOL (

http://

www.rigol.com

).

Publication Number

PGH09100-1110

Software Version

00.00.01

Software upgrade might change or add product features. Please acquire the latest
version of the manual from RIGOL website or contact RIGOL to upgrade the software.

Format Conventions in this Manual

1. Key

The front-panel key is denoted by the menu key icon. For example, the 
indicates the “Utility” shortcut key.

2. Menu

The menu function key is denoted by the format of "Menu Name (Bold) +
Character Shading" in the manual. For example, System indicates the “System”
menu option in the operation interface. Tap System to access the “System”
function menu.

3. Operation Procedures

The “>” denotes the next step of the operation. For example, 

>Store

indicates first tapping 

, and then tapping Store.

Content Conventions in this Manual

The following DP2000 series power supply model is available. Unless otherwise
specified, this manual takes DP2031 as an example to illustrate the functions and
operation methods of DP2000 series power supply.

 Document Overview

Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.

1

Summary of Contents for DP2000 Series


















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands