manualshive.com logo in svg

Rigol DP2000 Series, Programming Manual

Share
Download
Rigol DP2000 Series Programming Manual Download Page 51

4.7.7

:MEMory:MDIRectory

Syntax

:MEMory:MDIRectory

 <

folder_name>

Description

Creates a new folder in the current directory.

Parameter

Name

Type

Range

Default

<folder_name> ASCII string

Refer to 

Remarks

-

Remarks

•

<folder_name> is the name of the new folder, which can contain 255 characters
in maximum. The name can consist of Chinese characters, English letters, and
numbers (one Chinese character takes two bytes).

•

Folders cannot be created in C disk. If the current path is C disk, send this

command and a prompt message will be displayed.

Return Format

None.

Examples

:MEMory:MDIRectory NEW /*Creates a folder named NEW in the current 

directory.*/

4.7.8

:MEMory:STORe

Syntax

:MEMory:STORe

 <

filename>

Description

Saves the file including instrument state file (.RSF) and Arb file (.RTF) with the
specified filename in the current directory.

Parameter

Name

Type

Range

Default

<filename>

ASCII string

Refer to 

Remarks

-

 Command System

Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.

43

Summary of Contents for DP2000 Series


















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands