Rigol DG1022Z, User Manual

Page: 127 / 180

Chapter 2 Front Panel Operations RIGOL
DG1000Z User’s Guide 2-89
Waveform Summing
1. To Enable Waveform Summing Function
Press Utility

Channel Set

Sum Wforms

Switch, select “On” to
enable the waveform summing function and sum a specified waveform on the
current waveform or select “Off” to disable the waveform summing function.
Note: this function is valid only for the basic waveforms.
2. To Select Sum Source
Press Utility

Channel Set

Sum Wforms

Sum Source to select the
desired waveform to be summed on the current waveform.
3. Sum Frequency
Set the frequency of waveform to be summed on the current waveform. Press
Utility

Channel Set

Sum Wforms

Sum Frequency to input the
desired value using the numeric keyboard and select the desired unit from the
pop-up menu. The range is related to the currently selected waveform.
4. Sum Ratio
Set the ratio of the amplitude of the waveform to be summed on the current
waveform relative to that of the current waveform. Press Utility

Channel
Set

Sum Wforms

Sum Ratio to input the desired value using the
numeric keyboard and select the unit % from the pop-up menu.