RIGOL
© 2008
RIGOL
Technologies, Inc.
User’s Guide for DG1022
3-20
Figure 3-20
Channel Coupling Interface
7.
As shown in the above figure, in the display area of the base channel CH1, there
is a “*” sign under the Phase menu, which indicates that the phase of CH2 will
change according to CH1.
8.
As shown in the following figure, use the knob to change the phase of CH1, then
the phase of CH2 will automatically change. The phase deviation is always 10°.
Figure 3-21
Phase Coupling Instruction
9.
Setting of the frequency coupling is similar to phase coupling.
