RIGOL
© 2008
RIGOL
Technologies, Inc.
User’s Guide for DG1022
2-3
To Set the Output Frequency/Period
1.
Press Sine
Freq/Period
Freq, to set the frequency parameter.
The frequency shown on the screen is the default value when the instrument is
powered or the set value beforehand. When setting the function, if the current
value is valid for the new waveform, it will be used sequentially. If you want to set
the period for the waveform, press Freq/Period button again, switch to the Period
parameter (The current operation is displayed in inverse color).
2.
Input the desired frequency.
Use the keypad to input the parameter value directly, and press the
corresponding button to select the parameter unit. Or you can use the direction
keys to select the digit you want to edit, and then use the knob to change its
value.
Figure 2-2
Setting the Frequency
Instructions
When using the keypad to enter the digit, you can use the Left direction keys to
move the cursor backward and delete or change the value of the previous digit.
When using the knob to input, use the direction keys to select the digit you
want to edit and rotate the knob to change its value.
Current Parameter:
Frequency
