7
3: Insert a street tee fitting into the top of the air bag.
The street tee fitting should match the thread size and
type of the vehicle suspension. Reinstall the
suspension air line and fitting into the street tee. For a
list of recommended hardware, please see Appendix
A.
4: Install a new
1/4”
air line and fitting to be used with
the Right Weigh load scale into the street tee. Run the
new air line from the street tee fitting to the mounting
location of the scale.
Installation and Electrical Connections
5: Insert the new air line into the
push
-
to
-
connect fitting on the back
of the gauge. Repeat steps 2
through 5 for the additional HCV if
applicable. Air up the suspension
and check connections for leaks.
Summary of Contents for 201-RTS Series
Page 17: ...17 Notes...
Page 31: ...31 Notes...
