Right Weigh 201-RTS Series, Installation And Operation Manual

Page: 18 / 32

18
When connected with Bluetooth
®
wireless technology enabled Right Weigh
load scales, axle group weight readings are displayed on the Right Weigh Load
Scale App
.
Right Weigh Bluetooth ™ App Overview
1. View Data, Settings and Support: Use this button to view stored weight data, go
to the app settings screen, or view our support page.
2. Scale Name (Truck): The name of the connected truck - mounted scale appears
here. Tap the name to set a new name for the scale. The name you set will be
saved to the scale itself and the scale will be identified by that name in the future
when visible to a device.
3 Axle Group Name: This name represents the axle group which the scale is
monitoring and reflects the set
- up mode of the scale.
4. Print: This button allows you to print weight data to Bixolon mobile printers.
5. Share: This button will open the share data view to send weight data via email
or SMS.
6. Settings : This button will open the app settings screen, see page 23 for more
info.
7. Total Weight: Shows vehicle ’ s total weight
8. Signal Status: A blue icon represents that the device is connected to the scale
and is receiving data. A grayed
- out icon means the scale has been disconnected.
Pressing the refresh button will attempt to reconnect the device to the scale.
9. Add a Scale: Press the “+ Truck ” button to add a truck mounted scale to the app.
Press the “+ Trailer ” button to add a trailer mounted scale to the app.
The basic steps to connect your Right Weigh load scale to your smart device
are:
• Discover the unique name of your load scale(s)
•
Setup your load scales to the desired configuration
•
Sync your load scale(s) with your smart device