Right Weigh 201-RTS Series, Installation And Operation Manual

Page: 14 / 32

14
In order for the gauge to provide the most accurate weight values, you must take
care to position the vehicle correctly. For best results, follow these steps:
Operating and Weighing Instructions
+
1: Park on a level surface. Shift the transmission to neutral and
set the parking brakes.
2: Chock the wheels to prevent unexpected vehicle movement,
then release the parking and service brakes.
3: Make sure the Height Control Valve (HCV) has fully inflated
the air bags. If needed, briefly dump the air from the suspension
and allow the HCV to refill the system. (This may take several
minutes depending on the type of HCV.)
4: Press the ON/OFF button to turn on the Right Weigh load
scale.
5: If monitoring multiple axle groups, press the MENU button to
cycle the display through each axle group.
6: Adjust the suspension or the load itself until the Right Weigh
load scale displays a weight value below your legal limit.
7: Press the ON/OFF button to turn off the Right Weigh load
scale.
• The display will turn itself off after 60 minutes.
• To change the units from pounds to kilograms, hold
the UP arrow button, then press the MENU button.