28
Crimp each end of the wire into the
connector with a wire crimp tool
(tool not provided).
With a heat gun or heat torch, heat
the connector until it shrinks
completely around each wire end.
Make sure you do not burn the wire
jacket.
After all connections have been
made, heat shrink the entire group
of splices so that it seals on the
outer jacket of both cables
Appendix B
-
Wiring Insulation
It is very important that all wiring connections be made watertight.
Connections which are not watertight will allow moisture to travel through the
individual strands of the wires and make it
’
s way into the scale, causing
permanent damage to the electronics.
Heat shrinkable splices are included with the 201
-
SK installation kit.
Summary of Contents for 201-RTS Series
Page 17: ...17 Notes...
Page 31: ...31 Notes...
