RI-1313-(2) Revision 1.0
5/3/2001
page 13
FOLDING THROW-OUT PILOTCHUTE (T.O.P.)
Step 1
Place pilotchute on a flat surface with the handle down and
spread to its full size.
(Figure 13)
Step 2
Fold pilotchute in half and stow excess bridle near the outer
edge of pilotchute.
(Figure 14)
Step 3
Fold outside edge toward handle keeping bridle inside.
(Figure 15)
Step 4
Fold pilotchute into thirds as shown.
(Figure 16)
Step 5
Fold pilotchute into thirds again so the result is a flat package
about the same length and width as spandex pocket.
(Figure 17)
Step 6
Slide pilotchute into spandex pocket so that only handle
protrudes.
( Figure 18)
Stow excess bridle under right side main flap.
Figure 14
Figure 15
Figure 17
Figure 16
Figure 13
Figure 18
