RI-1313-(2) Revision 1.0
5/3/2001
page 25
4.2
Parachute Assembly Inspection Form
! Note: Count all Tools Before Starting Assembly
Qty:
manufacturer:
model:
Harness and
date of manufacture:
Container
serial no:
Initial After Each Item If No Discrepancies Are Found Initials
1.
Main lift web
2.
Chest and leg straps
3.
Harness hardware and connectors
4.
3-ring release
5.
Pilotchute pocket
6.
Reserve ripcord, handle pocket, cable housing
7.
Cutaway handle, attachment point, cable housing and channels
8.
Container flaps and grommets
9.
Closing loop length (main and reserve)
10.
Comments:
manufacturer:
model:
Main Canopy and
date of manufacture:
Pilotchute
serial no.:
Initial After Each Item If No Discrepancies Are Found Initials
1.
Risers and 3-Ring
2.
Connector links and slider bumpers
3.
Slider grommets, tapes, fabric
4.
A-lines and attachment points
5.
B-lines and attachment points
6.
C-lines and attachment points
7.
D-lines and attachment points
8.
Steering lines and toggles
9.
Canopy cells and cross-ports
10.
Slider stops ( on canopy )
11.
Bridle line, d-bag stop, pin
12.
Pilotchute and handle or pud
13.
Deployment bag
14.
Comments:
A
B
