Riello RS 1000/M C01, Installation, Use And Maintenance Instructions

Page: 20 / 52

20061862
18 GB
Installation
5.9 Electrode position
5.10 Combustion head adjustment
The air damper servomotor 4)(Fig. 4), beyond varying the air out-
put according to the output demand, through a leverage varies
the combustion head adjustment.
This system allows an optimum adjustment also at minimum fir-
ing rate. Similarly to servomotor rotation, it is possible to vary the
opening of the combustion head moving the tie-rod on the holes
(5-6-7-8-10)(Fig. 15).
The selection of the hole to be used is determined based on the
maximum output requested, as illustrated in Tab. J.
In the factory, the adjustment is adjusted for the maximum stroke
(hole 10, Fig. 15).
Tab. J
WARNING
Place the electrode on the ignition pilot observing
the dimensions specified in Fig. 14.
Fig. 14
18.5
0
- 2
71.5
± 1
Electrode
D9218
Diffuser
Leverage hole
Output (kW)
From A
R
S
1
0
0
0
5 1200 3750
5 3750 6700
8 6700 8600
8 8600 10600
R
S
1
2
0
0
5 1500 5500
5 5500 7500
6 7500 9600
10 9600 11500
5
6
7
8
10
Fig. 15
20058942