Riello RS 1000/M C01, Installation, Use And Maintenance Instructions

Page: 14 / 52

20061862
12 GB
Technical description of the burner
4.10 Electrical panel description
1 Main terminal supply board
2 Clean contacts output relay
3 Ignition transformer
4 Stop push-button
5 OFF-automatic-manual selector
6 Power increase - power reduction selector
7 Light signalling of motor - fan thermal relay operation
8 Light signalling of burner lockout and reset switch
9 Electrical control box
10 Timer
11 Air pressure switch
12 Fan motor contactor and thermal relay, star-triangle starter
13 Supply cables, external connections and kits
14 Terminal board for kit RWF40
15 Auxiliary circuits fuse
16 Plug/socket servomotor
17 Light signalling of main fuel valve open
18 Heat request light signalling
19 Light signalling of mains live state
20 Flame sensor plug/sensor socket
NOTE
Two types of burner lockout may occur:
➤ Control box lockout: if the pushbutton (red led) of the con-
trol box 9)(Fig. 5) and the pushbutton with light 8) light up,
this indicates that the burner is in lockout.
Release by pressing the pushbutton 8).
➤ Motors lockout: release by pressing the button on the rele-
vant thermal relay.
4.11 Burner equipment
Gasket for gas train flange . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Thermal insulation screen . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Screws M12x25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 2
Gas flange fixing screws M16x70 . . . . . . . . . . . . . . . . . . . No. 8
Screws M20x70 to secure the burner flange to the boiler . . No. 4
Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Spare parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
10
12
14
9
4
5
6
8
19
18
17
7
2
15
3
20 11 1
16
Fig. 5
20058939