Riello RLS 120/EVi MX FS1, Installation, Use And Maintenance Instructions

Page: 54 / 84

20121213
52 GB
Start-up, calibration and operation of the burner
300 BURNER CHECKS (FUEL 1)
301
Burner operation mode (fuel supply line, modulating/
stage, servomotors, etc.)
-- = not defined (eliminate curves)
1 = Gmod
2 = Gp1 mod
3 = Gp2 mod
4 = Lo mod
5 = Lo 2 stage
6 = Lo 3 stage
7 = Gmod pneu
8 = Gp1 mod pneu
9 = Gp2 mod pneu
10 = LoGp mod
11 = LoGp 2-stage
12 = Lo mod 2 fuel valves
13 = LoGp mod 2 fuel valves
14 = G mod pneu without actuator
15 = Gp1 mod pneu without actuator
16 = Gp2 mod pneu without actuator
17 = Lo 2-stage without actuator
18 = Lo 3-stage without actuator
19 = G mod only gas actuator
20 = Gp1 mod only gas actuator
21 = Gp2 mod only gas actuator
22 = Lo mod only oil actuator
1 -
Modify/set to
zero
1 22 1 Not defined Service Mode
321
(Fuel 1) Gas: selection of flame sensor
0 = QRB.../ QRC
1 = ION / QRA
1 - Modification 0 1 1 1 Service Mode
322
(Fuel 1) Gas: Selection of the pre-purging function
0 = deactivated
1 = activated
1 - Modification 0 1 1 1 Service Mode
323
Maximum repeats of minimum gas pressure switch
intervention
1 = No repetition
2...15 = Number of repetitions
16 = Constant repetitions
1 - Modification 1 16 1 16 Service Mode
325 (Fuel 1) Gas: pre-purging time 1 s Modification 20s 60 min 0.2s 20s Service Mode
326 (Fuel 1) Gas: Spark pre-ignition time 1 s Modification 0.4 s 60 min 0.2s 2s Service Mode
330 (Fuel 1) Gas: interval 1 1 s Modification 0.4 s 60s 0.2s 2s Service Mode
332 (Fuel 1) Gas: interval 2 1 s Modification 0.4 s 60s 0.2s 2s Service Mode
333 (Fuel 1) Gas: post-combustion time 1 s Modification 0.2s 60s 0.2s 8s Service Mode
334
(Fuel 1) Gas: Post-purging time (no extraneous light
test)
1 s Modification 0.2s 108 min 0.2s 0.2s Service Mode
336
(Fuel 1) Gas: Minimum gas pressure switch input
0 = deactivated
1 = minimum gas pressure switch (upstream of the
fuel valve 1 (V1))
2 = valve control via the minimum pressure switch
(between fuel vale 1 (V1) and 2 (V2))
1 - Modification 1 2 1 1 Service Mode
337
(Fuel 1) Gas: Maximum gas pressure switch / POC
Input
0 = deactivated
1 = Maximum gas pressure switch
2 = POC
3 = Leak detection control pressure switch
1 - Modification 1 2 1 1 Service Mode
341
(Fuel 1) Gas: Valve leak detection test
0 = test deactivated
1 = valve leak detection test at start up
2 = valve leak detection test at shutdown
3 = valve leak detection test at start-up and at shut-
down
1 - Modification 0 3 1 2 Service Mode
348
(Fuel 1) Gas: Post-purging time (t3)(at deactivation of
the load (LR)) - ON
1 s Modification 1s 108 min 0.2s 1s Service Mode
361
(Fuel 1) Oil: selection of flame sensor
0 = QRB.../ QRC...
1 = ION / QRA...
1 - Modification 0 1 1 0 Service Mode
365 (Fuel 1) Oil: pre-purging time 1 s Modification 15s 60 min 0.2s 15s Service Mode
366 (Fuel 1) Oil: Spark pre-ignition time 1 s Modification 0.6s 60 min 0.2s 2s Service Mode
370 (Fuel 1) Oil: interval 1 1 s Modification 0.4 s 60 min 0.2s 2s Service Mode
Parameter
No. of
elements
Unit of
measure-
ment
Modifica-
tion
Values interval
Degree of
precision
Predefined
setting
Access mode
No. Description Min. Max.