Cleaning, maintenance and care
46
Rieber GmbH & Co. KG
When the water pump switches off again, press the
Humidification button
again
continuously, until you hear the water pump switch on and the remaining descaling
solution is pumped out. Wait until the descaling solution is completely pumped out.
Empty the GN container.
# Rinse the appliance 3x.
Place the empty GN container on the lowest support rail in the appliance.
Pour
around 0.5 litres of drinking water
into the water container.
Note:
The water pump requires three pumping out processes for the 0.5 litres of water.
Press the
Humidification button
continuously, until you hear the water pump switch
on.
When the water pump switches off again, press the
Humidification button
again
continuously, until you hear the water pump switch on. Repeat the process again, to
pump out the water completely.
Empty the GN container.
Repeat the complete rinsing process twice more.
Check that the water has been completely pumped out of the water tank and the
interior. Repeat the process if necessary.
See ‘Pump residual water out of the appliance, rinse the appliance’; page 40
8.8
Keep ready for next use in dry condition
Dry the inside of the appliance and leave the door open until the residual moisture has dried off.
Store appliance at room temperature.
