Cleaning, maintenance and care
40
Rieber GmbH & Co. KG
8.5
Pump residual water out of the appliance, rinse the appliance
# Pump out residual water
Pump residual water out of the appliance daily after use. If residual water remains in the appliance, this
can impair the taste of the food.
Place an empty GN container on the lowest support rail in the
appliance.
Turn the unit off.
Turn the
dial
to the
POWER
setting
.
The corresponding LED lights up.
Press the
Humidification button
continuously, until you hear the water pump switch on. The
pumping out process lasts around 5 or 6 seconds. Do not interrupt the process, otherwise the
pumping out process will begin again at the next START of the appliance.
Check that the water has been completely pumped out of the water tank and the interior. Repeat
the process if necessary.
Empty the GN container.
# Rinse the appliance
Place an empty GN container on the lowest support rail in the appliance.
Pour
around 0.5 litres of drinking water
into the water container.
Note:
The water pump requires three pumping out processes for the 0.5 litres of water.
Press the
Humidification button
continuously, until you hear the water pump switch on.
When the water pump switches off again, press the
Humidification button
again continuously,
until you hear the water pump switch on. Repeat the process again, to pump out the water
completely.
Empty the GN container.
