Before First Use
16
Rieber GmbH & Co. KG
6
Before First Use
This chapter describes the measures to be taken before use.
6.1
Transport
# Check/deal with any transport damage
Immediately after delivery, visually check the appliance for any transport damage.
Document any potential transport damage on the consignment note in the presence of the haulage
contractor. Have the damage confirmed by the haulage contractor (with signature).
Decide if you wish to keep the appliance and report the defect using the consignment note, or if
you wish to reject the appliance.
▌
By following this procedure you will ensure proper claim settlement.
# Unpacking
Open the transport packaging at the positions provided for this purpose. Do not tear or cut.
Remove any packaging remnants.
# Scope of delivery
Check the scope of delivery.
6.2
Commissioning
Observe the prerequisites
Observe minimum distance
for the air circulation at the back panel,
≥ 10 cm
.
Installation only intended and permitted by the Rieber company or a specialist dealer, for
example in Rieber's ‘aircleansystem’ installation station. Installation by the operator is only
permitted in exceptional cases and at the operator's own responsibility.
The appliance has no defects or visible damage.
The appliance is at room temperature and is dry.
CAUTION
Protective foils or heat-sensitive objects at/in the appliance might damage the appliance
during heating.
►
Ensure that there are no
protective foils
on the inside or outside of the appliance.
►
Remove the protective sleeve on the tip of the
core temperature sensor
before first
use.
