Use
28
Rieber GmbH & Co. KG
7.11.2 Program 2: Core temperature
▌
The displays of the core temperature, chamber temperature, time and
humidification function keys flash (flashing = changeable).
Set core temperature, chamber temperature, time and steam.
Press
START button
(12).
▌
The 'Core temperature' program starts with the saved settings.
Change settings for the current cooking process
Press the
STOP button
(11) and hold for around 5 seconds.
▌
Back to the functions. These can be reset. The running program is
interrupted.
Press the
START button
to continue the program.
▌
The current chamber temperature is shown in the display again.
Cancel program
Press the
STOP button
and hold for around 5 seconds.
▌
Back to program selection. The running program is terminated.
Press the
STOP button
again and hold for around 5 seconds.
▌
The appliance switches to Standby mode.
▌
The current chamber temperature is shown in the display again.
7.11.3 Program 3: Fan
Cooling is only possible if the navioven contains cooling pellets.
Insert cooling pellets.
Passive cooling with circulating air + cooling pellets.
Turn
dial
(4) to program 3, set fan.
Press the
START key
.
▌
Circulating air operation begins when the program starts.
▌
The current chamber temperature is shown in the display.
Press the
STOP button
and hold for around 5 seconds.
▌
Back to program selection. The running program is terminated.
▌
The current chamber temperature is shown in the display again
Press the
STOP button
again and hold for around 5 seconds.
▌
The appliance switches to Standby mode.
▌
The
POWER ON LED
(6) lights up.
▌
The readings in the display disappear.
