background image

5 - English

SYMBOLS

FEATURES

PRODUCT SPECIFICATIONS

Coupler ..................................................................... 1/4 in.
Impacts per minute  ...................................... 0 – 4,300/min
Max Torque ..................................................... 2,400 in.-lbs 

No Load Speeds:

Low (1) ............................................. 0 – 800/min. (RPM)
Medium (2) .................................... 0 – 2,000/min. (RPM)
High (3).......................................... 0 – 3,400/min. (RPM)
Self-Tapping Mode ( ) .................. 0 – 2,000/min. (RPM)

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter-
pretation of these symbols will allow you to operate the product better and safer.

SYMBOL

NAME

DESIGNATION/EXPLANATION

Safety Alert

Indicates a potential personal injury hazard.

Read Operator’s Manual

To reduce the risk of injury, user must read and understand opera-
tor’s manual before using this product.

Eye Protection

Always wear eye protection with side shields marked to comply 
with ANSI Z87.1.

Wet Conditions Alert

Do not expose to rain or use in damp locations.

 

Recycle Symbol

This product uses lithium-ion (Li-ion) batteries. Local, state, or 
federal laws may prohibit disposal of batteries in ordinary trash. 
Consult your local waste authority for information  regarding avail-
able recycling and/or disposal options.

V

Volts

Voltage

min

Minutes

Time

Direct Current

Type or a characteristic of current

No Load Speed

Rotational speed, at no load

.../min

Per Minute

Revolutions, strokes, surface speed, orbits etc., per minute

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL

SIGNAL

MEANING

DANGER:

Indicates a hazardous situation, which, if not avoided, will result in death or 
serious injury.

WARNING:

Indicates a hazardous situation, which, if not avoided, could result in death or 
serious injury.

CAUTION:

Indicates a hazardous situation, that, if not avoided, may result in minor or 
moderate injury.

NOTICE:

(Without Safety Alert Symbol) Indicates information considered important, but 
not related to a potential injury (e.g. messages relating to property damage).

Summary of Contents for R862312

























Reviews: