RIDEON USER MANUAL
– PAGE
9
The Power Indicator -
This LED lights up to indicate 3 different modes. Their meanings are:
1.
Constant green light -
Goggles are on.
2.
Constant red light -
Goggles are charging.
3.
Blinking red light -
Goggles are connected to charger, but
aren’t charging (usually because
battery is full).
Ski Configurations
:
1.
RideOn goggles owner:
a.
All RideOn features available if -
Both goggles
and
RideOn app are ON.
b.
If only goggles ON, but RideOn app OFF
- All features available, except for
communication features and goggles status (via Heartbeat page) (
see RIDEON APP
)
SET UP
Wearing the goggles -
Always adjust the head strap while the goggles are on and working in order to fix
the see-through display over your right eye.
1.
Make sure
goggles are ON
.
2.
Wear
your helmet (safety first!).
3.
Loosen
the headband, and wear the goggles around your helmet.
4.
Tighten
goggles’ headband so that they fit your face snuggly yet comfortably, and won’t s
lip
while skiing.
5.
Finally, check that the see-
through display’s
projection screen is clearly visible
in your right eye.
All four sides of the screen should be clear and not “cut” out of view.
