background image

Ride

®

 FlexLoc

Owner’s Handbook

Warranty Policy

Installation and Use Instructions

toll-free: 866.781.1633

phone: 303.781.1633

www.ridedesigns.com

Ride Designs

®

a branch of Aspen Seating, LLC 

8100 SouthPark Way, C400

Littleton, Colorado 80120 USA

®

Warranty Policy

This Limited Warranty is effective for 24 months from the date of delivery 

to the original purchaser. If any defect in material or workmanship is found, 

Ride Designs

®

 will repair or replace the component, at our discretion. This 

limited warranty does not cover daily wear and tear or damage due to 

accidents, neglect, misuse, operation beyond capacity, parts damaged by 

improper installation, substitution of parts not approved by Ride Designs, not 

following these care and maintenance instructions, or any alteration or repair 

by others that, in Ride Designs’ judgment, materially or adversely affects your 

FlexLoc

 hardware. 

Claims and repairs should be processed through your nearest authorized 

Ride Designs rehab technology supplier. A copy of the Bill of Sale issued  

to the purchaser of the product may be required prior to processing a  

warranty claim.
Maximum client weight capacity is 250 pounds for Ride Custom Backs  

attached to wheelchair using the FlexLoc hardware.
Maximum client weight capacity is 300 pounds for Ride Custom Backs  

attached to wheelchair using two (2) FlexLoc hardware kits.

M

Summary of Contents for FlexLoc FL-MS









Reviews: