3. Adjust seat depth and vertical
rotation.
a. Loosening of pivot screws and
width adjustment set screws allows
for seat depth and vertical rotation
adjustment as shown.
NOTE: Pivot screws must be loosened
sufficiently to separate teeth to allow
movement.
CAUTION: Only loosen pivot screws
until teeth are disengaged. If either pivot
screw is backed off too much it will
damage the retainer clip.
4. Adjust back rotation.
a. Use the 10mm open end wrench
to loosen four (4) back rotation
bolts, and rotate back to desired
orientation.
Once adjustments are completed,
ensure all fasteners are securely
tightened.
Visit www.ridedesigns.com for
additional instructions.
6
Seat Depth
Vertical Rotation
Y
