General Product Safety
Safe application of this product depends upon your good judgment and
common sense, as well as that of your provider, caregiver, and/or healthcare
professional, and your attentiveness in following the warnings, cautions and
notes in this handbook and corresponding web-based instructions at www.
ridedesigns.com/flexlocinstructions.
WARNING: Indicates a potentially dangerous situation which, if not heeded,
could result in serious injury.
CAUTION: Failure to heed cautions may result in damage to your product.
NOTE: Denotes important things to remember and/or do when installing and
using this product.
NOTE: Ride Designs is not liable for damage to property or personal injury arising
out of unsafe use of this product. Ride Designs is also not liable for any property
damage or personal injury arising out of the failure of any person and/or user to
follow the instructions or recommendations set forth in 1) this manual, or 2) any
other instructions or recommendations contained in related literature issued by
Ride Designs, or 3) contained on the product itself, or 4) web-based instruction.
NOTE: We have compiled this manual from the latest specifications and product
information available at the time of publication. We reserve the right to make
changes as they become necessary. Any changes to our products may cause
slight variations between the illustrations and explanations in this manual and the
product you have purchased.
The FlexLoc Mounting Hardware
Intended for mounting of the Ride Custom Back onto wheelchair back canes, the
FlexLoc hardware is adjustable through six axes. The FlexLoc safely secures the
Ride Custom Back yet is removable by flipping two levers on the optional quick
release pins. It is intended for use on any wheelchair with tubular back canes, but
does not allow the chair to fold unless removed.
Adapter mounting plates are available for a variety of other wheelchair
interfaces. Contact Ride Designs for information regarding mounting of FlexLoc on
wheelchairs without tubular back canes.
WARNING: Installing a back support on a wheelchair may affect the center of
gravity of the wheelchair and may cause the wheelchair to tip backwards or
forwards, potentially resulting in injury. Always assess for the potential need for
anti-tippers or amputee axle adapter brackets to be added to your wheelchair to
help increase stability.
WARNING: Failure to accurately assess and adjust the fit of the Ride Custom Back
may result in serious injury to the user.
1
Ride Designs and the RIDE logo are registered trademarks of Aspen Seating, LLC.
Y
Y
Y
Y