When automated irrigation starts are executed, the irrigation program will
always use the recipe settings of the valve group during the active period. If
no period is active, then irrigation will not start automatically.
6.3.9
Alarms
On the top bar, there is a bell icon ‘
' that enables you to access the alarm screen.
When this bell is active, it means that an alarm is currently present.
Tap the (active) bell '
'. The alarm screen opens.
The alarm screen contains information about your current alarms and your alarm
history. If you open the alarm screen and no alarms are currently present, then the
following text will be shown: No alarms present!
Figure 6-17:
The alarm screen
The alarm screen lists the following for each alarm: status, location, time and
corresponding message.
If you tap an alarm, a pop-up will appear with detailed information on the alarm. This
is also where you can acknowledge the alarm. If you acknowledge an alarm, it will be
reset. However, if the cause of the alarm has not yet been resolved, then the alarm
will probably return almost immediately.
Figure 6-18:
Alarm
HortiJet-Go!
56