If you have agitators in your fertilizer tanks, the settings to control the
agitators can be found under:
.
This requires an Agitator Smart Switch.
EC and pH dosing
You can set the EC and pH target values on the settings screen for automatic
irrigation. To get to this screen, navigate the following path:
. The EC and pH settings are listed at the bottom; use
the arrow down button to get to these settings.
Figure 6-9:
You can set the EC and/or the pH target values for each predefined
period.
Tap EC or pH in a period. A pop-up window appears.
Set the EC target value in mS/cm, or the pH target value.
Tap the confirm icon ‘
’.
You have set the EC and/or pH target values.
Dosing ratio
If more than one fertilizer is used, you can set the dosing ratio of each fertilizer. To
set the dosing ratios, navigate the following path:
.
By default, the irrigation program uses the same ratio for all available fertilizers.
Tap one of the
Fertilizer dosing ratio
settings (for example, Dosing ratio 1). A
pop-up window appears.
Enter a percentage.
Tap the confirm icon ‘
’.
You have entered a fertilizer ratio.
HortiJet-Go!
50