10 February 2005
DATA OVERWRITE SECURITY UNIT (B735)
1-61
Ins
ta
lla
tion
1.16 DATA OVERWRITE SECURITY UNIT (B735)
ACCESSORY CHECK
Check the quantity and condition of these accessories.
Description Q’ty
1. SD Card..............................................................................1
2. Operation Instructions (CD-ROM) ......................................1
Seal Check and Removal
!
CAUTION
Before you start the installation, you must check the box seals to make
sure that they were not removed after the items were sealed in the box at
the factory.
1. Check the box seals [A] on each corner of the box.
•
Make sure that a tape is attached to each corner.
•
The surfaces of the tapes must be blank. If you see “VOID” on the tapes, do
not install the components in the box.
2. If the surfaces of the tapes do not show “VOID”, remove them from the corners
of the box.
3. When you remove each seal, the “VOID” marks [B] can be seen. In this
condition, they cannot be attached to the box again.
B735I901.WMF
B735I903.WMF
[B]
[A]
