SERVICE PROGRAM MODE
10 February, 2005
5-40
5
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
828 91 Web
(0: OFF 1: ON)
Turns on/ off the web.
[0 ~ 1 /
1
/ 1 /step]
•
0: OFF
•
1: ON
HDD
Enter the SP number for the partition to initialise, then press
. When the execution
ends, cycle down and on.
NOTE:
Use this SP mode only for hard disk error recovery.
1
HDD Formatting (ALL) Initializes the hard disk.
2
HDD Formatting (IMH) Initializes followings:
•
Documents stored on the document server
•
Stamp print data
•
Scanner delivery images
•
Fax delivery images
3 HDD
Formatting
(Thumbnail)
Initializes MCS thumbnail images.
4
HDD Formatting
(Job Log)
Initializes lob data used by the Poplar server.
5 HDD
Formatting
(Printer Fonts)
Initializes printer fonts, overlay forms.
6
HDD Formatting
(User Info)
Initializes user information (UCS).
7
Mail RX Data
Initializes mail receive data (DCS)
8
Mail TX Data
Initializes mail send data (DCS)
9
HDD Formatting
(Data for a Design)
Designer use only.
10
HDD Formatting (Log)
Initializes the logs (fax history and debug log).
832
11 HDD
Formatting
(Ridoc interface)
Initializes the Net File management area.
e-Cabinet enable
833
13
e-Cabinet enable
Enables/disables the e-Cabinet.
[0 ~ 1 /
0
/ 1 /step]
•
0: Disabled
•
1: Enabled
The “e-Cabinet” supplies the interface for registration,
editing, deleting and obtaining the user’s code name.
NOTE:
Turn the main switch on and off after using this
SP.
NOTE:
Operation Panel Image Exposure
834
1
Turns the operation panel image capture function on/off.
[0 ~ 1 / 0 / 1 /step]
0: Disable, 1: Enable
Capture Setting
836
1 Capture
Function
0: Off 1: On
Turn the capture function on/off.
[0
∼
1 /
0
/ 1 /step]
•
0: Off
•
1: On
