Ricoh SP C440dn, Field Service Manual, Page: 454 / 654

5-828-066 Job Spooling Clear: Start
Time
Treatment of the job when a spooled job exists at power
on.
0: ON (Data is cleared)
1: OFF (Automatically printed)
5-828-069 Job Spooling (Protocol) Validates or invalidates the job spooling function for each
protocol.
0: Validates
1: Invalidates
bit0: LPR
bit1: FTP
bit2: IPP
bit3: SMB
bit4: BMLinkS
bit5: DIPRINT
bit6: sftp
bit7: (Reserved)
5-828-087 Protocol usage Shows which protocols have been used with the network.
0: Off (Not used the network with the protocol.)
1: On (Used the network with the protocol once or more.)
bit0: IPsec, bit1: IPv6, bit2: IEEE 802. 1X, bit3:Wireless
LAN, bit4: Security mode level setting, bit5:Appletalk,
bit6: DHCP, bit7: DHCPv6, bit8: telnet, bit9: SSL, bit10:
HTTPS, bit11: BMLinkS printing, bit12: diprint printing,
bit13: LPR printing, bit14: ftp printing, bit15: rsh printing,
bit16: SMB printing, bit17: WSD-Printer, bit18: WSD-
Scanner, bit19: Scan to SMB, bit20: Scan to NCP, bit21:
Reserve, bit22: Bluetooth, bit23: IEEE 1284, bit24: USB
printing, bit25: Dynamic DNS,
bit26: Netware printing, bit27: LLTD, bit28: IPP printing,
bit29: IPP printing (SSL), bit30: ssh, bit31: sftp
5-828-090 TELNET (0: OFF 1: ON) Enables or disables the Telnet protocol.
[0 or 1 / 1 / – /step]
0: Disable, 1: Enable
5. System Maintenance Reference
452